April 30, 2008
York has officially announced the release of their new electric and hydronic wall mount air handlers. The EW and HW series air handler units are primarily designed for 13 SEER apartment and condo applications as upflow indoor air handlers for split system heat pumps and air conditioners.
Here are some of the features of the new wall mount air handler:
-Cooling or Heat Pump applications with orifice, R22 TXV, or R410a TXV.
-Designed for front or bottom return air position.
-Closet installation or wall with decorative grille.
-Durable pre-painted steel cabinet.
-Cabinets fully insulated with 1/2" mylar faced insulation.
-High efficiency rifled copper tube & enhanced aluminum fins.
-Coils tested at 500 psi, nitrogen pressurized & factory sealed.
-Quiet, efficient, direct drive multi-speed blowers.
-Rail mounted blowers for easy service.
-Time Delay Relay (TDR).
-Factory or field installed electric heater kits (3, 5, 8, or 10 KW with circuit breaker).
-2, 3, or 4 row hydronic heat kits offered with and without pump.
-Heat kits easily installed using Molex plugs.
-Hydronic units provided with auxiliary relay for remote pump.
-Rugged, UV safe drain pan.
-The 22" inch wide cabinet size in all models allows units to fit between standard stud spacing.
-No return air ductwork is required if the application provides for return air in the front of the cabinet through either a louvered closet door or an optional accessory decorative grille panel.
-A disconnect opening seal cover is supplied as an accessory to be used if the unit is to be installed in non-conditioned space to eliminate condensation from forming around the pane.
-Primary and secondary drain connections exit from the bottom of primary on the right side of the cabinet.
-ETL and ARI certified.
-Full 5-Year Parts Warranty.
These products will be availiable to ship in early May. Please contact your local Branch or Territory Manager for more details.
<< Back to Active News Room
